3.5-8.0 ghz gaas mmic packaged low noise amplifier page 1 of 7 l1007-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07 12 db gain 2 db noise figure 3x3 qfn package single power supply 3-5 v, 40 ma self bias on-chip esd protection features electrical characteristics (t=25oc) circuit description mimix broadband?s 3.5 to 8.0 ghz low noise amplifier is packaged in surface mount 3x3 qfn package. the device is a self-biased, single supply design with 12 db gain and 2 db noise figure. this mmic uses mimix broadband?s 0.25um optical phemt process. supply voltage rf input power storage temperature (tstg) junction temperature operating temperature +6 v +10 dbm -55 oc to +125 oc 175 oc -40 oc to +85oc absolute maximum ratings frequency range gain input return loss noise figure output p1db output ip3 supply voltage parameter units ghz db db dbm dbm v min. 3.5 - - - - - - typ. - 12 -10 2.0 13 22 3 max. 8 - - - - - - typical parameters frequency gain ip return loss op return loss nf parameter 3.5 13 -15 -7.5 2.2 4 13 -15 -11 1.5 5 12.5 -11 -14 1.8 6 11 -12.5 -15 1.5 typical 7 10 -12.5 -15 1.8 8 7.5 -10 -10 2.4 operation beyond these conditions may cause permanent damage to the device.
page 2 of 7 low noise amplifier measurements 3.5-8.0 ghz gaas mmic packaged low noise amplifier l1007-qt xl1007-qt noise figure 3v, 40ma 0 0.5 1 1.5 2 2.5 3 3.5 4 45678910 frequency (ghz) noise figure, db nf xl1007-qt small signal performance 3v, 40ma -30 -25 -20 -15 -10 -5 0 5 10 15 20 012345678910 frequency (ghz) db s21 s11 s22 xl1007-qt gain over voltage 3v, 40ma 0 2 4 6 8 10 12 14 16 2345678910 frequency (ghz) s21, db 3v 4v 5v mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 3 of 7 low noise amplifier measurements (cont.) 3.5-8.0 ghz gaas mmic packaged low noise amplifier l1007-qt xl1007-qt oip3 vs frequency 40ma 10 15 20 25 30 55. 566. 577.58 frequency (ghz) oip3, db 3v 4v 5v xl1007-qt p1db vs frequency 40ma 0 2 4 6 8 10 12 14 16 55.566. 577 .5 8 frequency (ghz) p1db, db 3v 4v 5v mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 4 of 7 package pin-out table pin designator 1,2,4,5,6,7,8,9, 11,12,14,15,16 3 10 13 description nc rf input rf output vd 3.5-8.0 ghz gaas mmic packaged low noise amplifier l1007-qt evaluation board layout evaluation board schematic mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 5 of 7 typical performance for 3.5 ghz wimax 3.5-8.0 ghz gaas mmic packaged low noise amplifier l1007-qt xl1007-qt 3v, 40ma with l1= 1.8nh 0 0.5 1 1.5 2 2.5 3 3.5 4 2345678910 freq (ghz) nf (db) xl1007-qt 3v, 40ma with l1= 1.8nh 0 0.5 1 1.5 2 2.5 3 3.5 4 3.2 3.4 3.6 3.8 4 freq (ghz) nf (db) 012345678910 frequency (ghz) xl1007 with 1_8nh inductor -15 -12.5 -10 -7.5 -5 -2.5 0 2.5 5 7.5 10 12.5 15 3.5 ghz db(|s(2,1)|) xl1007_1_8nh db(|s(1,1)|) xl1007_1_8nh db(|s(2,2)|) xl1007_1_8nh c1 = 1uf c2 = 1000pf l1 = 1.8nh evaluation board layout for 3.2 ~ 3.8ghz wimax application: mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 6 of 7 package outline and assembly 0.65 1.00 a2 0 e e2 l d2 e k b d 0.16 0.20 1.50 0.20 3.00 bsc 0.26 0.36 1.65 1.80 0.50 - - 0.25 0.30 3.00 bsc nom 0.20 ref min a3 0.80 a max 0.90 1.00 1.50 1.65 1.80 a2 a d e 0.00-0.05 indicator pin 1 1. all dimensions are in mm note: 1.00 .005 package outline 0.30 .005 0.50 bsc recommended solder pad pitch and dimensions 1.40 .05 (4 sides) 2.00 .05 4.00 .05 a3 3.5-8.0 ghz gaas mmic packaged low noise amplifier l1007-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 7 of 7 handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matt tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. 3.5-8.0 ghz gaas mmic packaged low noise amplifier l1007-qt o rdering information part number for ordering description xl1007-qt-0g00 xl1007-qt-0g0t matte tin finished rohs compliant 3x3 qfn in bulk quantity matte tin finished rohs compliant 3x3 qfn in tape and reel XL1007-QT-EV1 evaluation board we also offer this part with snpb (tin-lead) or nipdau plating. please contact your regional sales manager for more information regarding different plating types. xl1007-bd-000x where ?x? is rohs compliant die packed in ?v? ?vacuum released gel paks or ?w? ?waffle trays. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
|
